Author: Admin View: Post Time: 2017 / 05 / 10
Common troubleshooting and troubleshooting methods:
Sudden stop, screw shaft card dead, new machine press. You don't get a lot of it through the mill. The thickness of the cake is too thin and the pressure of the press increases.
Solution:
According to the instruction, the sound of the oil press and the magnitude of the current strength are often noted.
2, the oil is too low, the oil is not suitable. The temperature of the press is low. The line of row and row of row is not meet the requirement. Wear parts.
Solution:
Follow the instructions. Loosen or tighten the nut, make it a small amount of slag, and flow oil smoothly. Replace worn parts.
The cake is oily, the oil is abundant. There were too few gaps in the row. Wear of oil mill parts.
Solution:
Operate according to the oil press instruction. Loosen the tension of the rum to increase the clearance. Replace new parts.
4, low yield, squeezing the cottonseed without take off the cloth with soft nap RongChang easy to bypass, wind axis, vats screw bore, not smooth, oil contained too much water, the pie mouth gap is too small, squeezer wear.
Solution:
Cottonseed de-fleece or filtered. After replacing the new parts, a period of grinding is required to make the screw smooth. Follow the instructions. Replace new parts.
Note to the oil mill:
Our oil mill applied engineer to negotiate with you to understand the effect of your oil press.
Send you the details of the oil mill by mail or E-mail.
If you're thinking about running a small business, you can also buy oil squeezer to call the oil press.
Depending on the oil you want to squeeze, you decide what to choose.
5, if you are a big oil processing plants, need to purchase complete oil mill equipment production lines, the complete oil press equipment professional experts for you answer, we have rich experience in complete sets of oil press.
Recommended, but not the most expensive oil press. Remark: we are sold at the factory price, the price of oil is reasonable.
We will discuss further and confirm with you that the oil mill will meet your requirements.
The final signing of the regular oil press contract.
