Author: Admin View: Post Time: 2016 / 11 / 28
Description of cinder crusher
Cinder crusher can crush highly wet and hard materials such as coal slack, shale, cinder, construction waste, slag, furnace slag, cement, refractory, heat insulating materials, etc.
as well as more than300 kinds of building materials. Better crushing effect can be accomplished in respect of building of brick plant and coal separation plant. Double rotors and double crushing, outlet size fine, no screen stencil, high wet materials no blockage.
High anti-wearing hammer, longer service life, hammer position shift technology triple the hammer service life. Hydraulic shell opening, easy operation and maintenance.
Features of cinder crusher
Two-stage without sieve at the bottom
High crushing ratio
Optimized crushing
Save 20% electricity
Robust construction and easy operation
Advantages of cinder crusher
Merit 1. Two rotor crushing in up and down two-stage
Two sets of cascade rotors make the material crushing two times and get fine final products. The material after crushing by the hammer on rotor, they also will be crushed by collide with each other reversely then achieved material less than 3mm, and can be unloaded directly.
Merit 2.No screen ( grate plate) , so have not strictly limit for moisture and using for high moisture contain material.
The traditional fine hammer crusher with grate sieve plate can not meet the raw material with the moisture content higher than 8%, if the moisture contain larger than 8%, it would be jam. The two stage hammer crusher have not screen ,it could solve this problem.
Merit 3.Equipped with balance wheel giving steady rotation and high inertia, saving electricity for 20%.
Merit 4. Centralized lubrication system, oiling without machine halt, conveniently and efficiently.
Technical parameter of cinder crusher
model
|
2PC600x400
|
2PC600x600
|
2PC800x600
|
2PC800x800
|
2PC800x1000
|
||
feeding size
|
≤150mm
|
≤200mm
|
≤260mm
|
≤350mm
|
≤450mm
|
||
discharging
size
|
≤3mm
(more than 90% should be ≤2mm)
|
≤3mm
(more than 90% should be ≤2mm)
|
≤3mm
(more than 90% should be ≤2mm)
|
≤3mm
(more than 90% should be ≤2mm)
|
≤3mm
(more than 90% should be ≤2mm)
|
||
capacity
|
15-25t/h
|
25-35t/h
|
45-60t/h
|
60-80t/h
|
80-100t/h
|
||
moisture
|
no requirement
|
||||||
motor power
|
18.5+18.5kw
|
22+22kw
|
45+45kw
|
55+55kw
|
75+55kw
|
||
size (mm)
|
2665x725x1698
|
2760x1280x1750
|
3625x1314x2065
|
4500x1700x3150
|
4500x1700x3150
|
Detailed image of cinder crusher
Gongyi Zhanjie Hengtong machinery mainly produce cinder crusher, coal cinder crusher, coal crusher machine, if you are interested in the machine, please contact with me! The email address is hengtongmachinery@yahoo.com.