Author: Admin View: Post Time: 2016 / 12 / 20
Edible oil is essential in our lives, then, and the generation of edible oil is closely related to screw oil press machine , and a good screw press is pure, sweet edible oil to produce a strong guarantee.
Our company is a professional production of oil extraction equipment manufacturers, our main business are: screw press, hydraulic press, sesame oil, two-phase electric oil press, three-phase electric oil press and various models of oil extraction Auxiliary machine. Oil depot and small and medium-sized oil plant can be opened to achieve one-stop procurement.
Oil press in the course of focusing on maintenance, can effectively improve the efficiency of equipment and extend equipment life.
1, the fuel tank to keep clean, every 3 months to clean the tank, and replace the new oil, oil impurities will cause wear and tear on the gear, and may result in blocked oil, affecting the normal work of the machine.
2, the oil pressure pump to filter, the concentration can not be too large, it is best to use rapeseed oil, soybean oil, peanut oil. Prohibited the use of gasoline, kerosene and other flammable fuel.
3, the handle and pump link, we should always add lubricants to reduce wear and tear.
4, screw press should be installed indoors, so as not to wind and rain, causing damage.
5, long-term parking, the machine should be wiped clean, oiled, and covered with protective cover.
Spiral screw press screw and adjust the gap between the cake circle, screw press is a new machine running a very important step.
Operation: operation, so that the screw press screw screw shaft ahead of death cake door, and then back 2-3 turn.
Detection standards: to control the gap in the 0.5-1 mm.
After the boot, so that the screw press for 3-5 minutes, and then the average speed of the cake or material feed, the screw press squeeze chamber friction heat. Milling chamber temperature can be higher, on the contrary can be lower.
Screw press oil pressing chamber temperature reached 70-80 ℃ (hand touch the body feeling hot), can only start squeezing.
Start squeezing, the need to strictly control the thickness of the cake, different types of oil, cake thickness of the standard is different from the general screw press the cake thickness should be controlled at 0.3-2.5 mm.
