Rapeseed oil press machine the ratio of oil and slag.

Rapeseed oil press machine squeeze the ratio of oil and slag is how much? This problem for the oil extraction users are required to know the knowledge, we all know that no matter what Rapeseed oil press machine squeeze raw materials, it will produce oil residue, and some oil out of oil, then it is relatively small slag, and some oil Its relatively low oil content, then it will be relatively more of the slag will be many, but no matter how many and less, there is a relative ratio, then the oil and slag comprehensive Rapeseed oil press machine ratio is how much it today for the analysis of a Fan.

Normal oil squeeze, you must keep the feed evenly, not too much too little or broken material idle. At this time the machine load is normal, smooth operation, the sound rhythm. A small amount of oil residue, but the proportion of slag in the oil is not greater than 10%, pressing the chamber temperature up to 150-200 ℃, the cake out of the cigarette smoke should be through the The shroud is exhausted from the smoking pipe. Squeeze hot cake to spread out in time, do not rush to play the heap or shipment, otherwise it will produce a natural phenomenon. When the continuous working time is longer, the machine temperature is too high, should take fan cooling measures such as hair.

Rapeseed oil press machine operation, the processed rapeseed into the press from the hopper chamber. Rotation by the pressing screw so that material inward to push forward, to squeeze. As the material embryo in the press of the press is carried out in the state of motion, in the press chamber under high pressure conditions, the material embryo and pressing screw, material embryo and squeeze chamber produced between the great friction resistance, so that Can make material embryo material between the friction, resulting in relative motion.

When the oil squeezed out of the oil filter into the above, press the vacuum pump button, the vacuum pump began to run, the air inside the oil filter was out of the oil filter barrel to form the internal pressure, the above oil naturally pumped into the oil filter , While the oil residue is isolated in the filter cloth to be pressed to complete the oil is pumped, open the valve on the oil filter to stop the vacuum pump running, the filter cloth on the formation of dry residue, scraped with a scraper, you can filter oil The bottom of the valve is released.