Oil amount of Multifunction oil press machine depends on Operation

My company specializes in the production of Multifunction oil press machine, large press, press accessories, press equipment such as oil press manufacturers series products compared with similar products with "low investment, low cost, high profits, quick" is characterized by Large, medium and small grain and oil machinery of choice.

Multifunction oil press machine normal operation, the high oil content of oil out of oil are mostly concentrated in the row of rows and the former group at the round row. The row of the oil output accounts for about 60% of the total output, the former group round row at about 30%; and the end of the oil is very small, not into a line drop, the oil is very clear. Repeated two or three times to squeeze the rapeseed or soybean oil to do, during which more oil can be evenly mixed with fuel in the embryo in the press, cutting to maintain uniform, avoid suddenly more suddenly less, Otherwise it will affect the Multifunction oil press machine life and oil yield.

Operation of the process to check the cake often Multifunction oil press machine situation, and control the moisture content of the embryo is neither too high nor too low. The normal cake should be flaky, smooth side by squeezing the screw, the other side there are a lot of fur. Such as the cake loose and weak, or a cake is not formed, darker color, hand pinch Serve fragments, indicating that the embryo feed water too little; such as the pie soft, into a large sheet, or the oil foam, Then add too much water. Under normal circumstances, no row between the row of slag or a little slag, slag in the row at the slag, such as slag was fine flake shows that more water, a powder residue is less water. In addition, changes in the oil position can be seen out of squeezed water is appropriate, when the squeeze into the water is too high or too low, the oil position are moving backwards.

Multifunction oil press machine squeezed sesame oil and other high oil content, the feed can be divided into batches, each batch of even pressed 2-3 times. Due to the first squeeze, oil flow, take away the heat more, can be the first batch of pressed cake immediately after the screw press for second and third press. And then squeeze the relative reduction of oil, oil flow away less heat, can make the machine temperature immediately rose to 70-80 ℃, in order to ensure normal working temperature.

Multifunction oil press machine factory has always been the spirit of "dedication, pragmatism and innovation" business philosophy, adhere to the "quality first, the credibility of the first" for the purpose of the broad masses of users with quality products and quality service, "quality of survival, customer-centric Management for efficiency, market and development "is the operating principle of our plant, I hope that the plant in the mutual benefit and common development on the basis of all the friends and co-operation, and jointly create a better future!