Reasonable operation is to ensure rapeseed oil press machine oil rate

Many rapeseed oil press machine customers will find a rapeseed oil press machine from other devices less oil, this center is due to heart factors, and some are due to material elements, but most of the operator is still the technical question and the operation process does not constitute the following small Compiled for our detailed explanation of why the peanut squeezed out of the oil factor.

 This article is not for the other from the analysis, and only focus on the operation method to discuss why rapeseed oil press machine out of oil rate is low. We all know that a very simple truth, we go to the third floor with a water pump, if the first floor and second floor are to open a mouth pressure will be reduced, the water to the third floor will become smaller or may directly hit Not up, because the pressure does not work. Press the oil press is this principle, if the residual grinding out too much will constitute the slag chamber pressure loss, when the loss is too large will make the material by the kneading intensity becomes very small, so the oil rate will Have been greatly affected.

rapeseed oil press machine is a high-oil crop, its structure is very simple in the fried chamber was under pressure to very strong, if we fried chamber out of the cake mouth is very thick regulation, then the bombing chamber constitute the resistance and pressure to reduce the . Although the rate of oil extraction has increased since then, the oil yield is actually reduced. And this reduction is not a thought, but a real reduction, but reducing the thickness of the cake will make the feed rate is reduced, so the formula permanently no results. Said here is not to enter a dead end, there is no way to solve the original method is very simple answer, that is mixed with the fee cake to squeeze rapeseed, rapeseed grain small feed full, if the increase in cake thickness will constitute a The oil is not complete, and lower the cake thickness on the power is low, and adding a certain share of the waste cake can make fried chamber feed more smoothly, that is, to reduce the grinding chamber of the grinding force and resistance, so that equipment operation change More fluid.

The above is the key to rapeseed oil press machine out of the main factors of low oil composition, if there are other circumstances may be equipment, doubt, perhaps the material question. Always rapeseed oil on the low number of elements, and ultimately there is an aspect of the element is speculation, speculation is not in place will also greatly affect the oil rate.