How to add lubricating oil to sesame oil expeller?

Sesame oil expeller is mainly used for single business processing of edible oil, such as peanuts, soybeans, sunflower, rapeseed, walnut, cottonseed, etc., almost all the oil crops can be squeezed through sesame oil expeller, together with some of the village is operating cooking oil business Of the preferred equipment. And sesame oil expeller from the climate constraints, the four seasons of North and South, due to the oil pan equipment using heating temperature control system, according to the ambient temperature, automatically scheduling the temperature of crude oil to achieve the effect of active fine filter, so the weather, climate Impact, can squeeze operations throughout the year.
Sesame oil expeller has a high rate of oil, energy, labor, wide use, oil quality, small footprint, high oil yield, all seasons, free from binding, efficient fine filter, flexible, extensive press, a machine And other advantages. It is one of the main business operators of edible oil processing equipment.
1. Pressure lubrication method - with machinery (such as oil pump, oiler) automatically lubricating oil pressure lubrication parts, also known as pressure Run method. In large and medium-sized cross-head with the compressor are used in this way.
 2. Spray lubrication method - the oil mist will be injected into the cylinder to follow the gas lubrication location sesame oil expeller, such as ultra-high pressure compressor, vane compressor and screw compressors are used fuel injection lubrication.
3. Drop oil lubrication method - the use of oil cup oil press, the oil should be sent to the parts of the fuel up, or filling oil on time with the oil pot.
4. Oil ring lubrication method - the use of rotating shaft driven to set the axis of the oil ring, sesame oil expeller oil ring will be the oil tank into the bearing into the cycle lubrication.
5. Splash lubrication method - by the rod mounted on the rod of oil from the oil splash splash lubrication to the lubrication of parts, so the cylinder and the movement can only use the same lubricant. This method is mostly used in small compressors without crossheads. The disadvantage is poor oil filter, oil level must be strictly controlled.