The working principle of rapeseed oil press machine

Rapeseed oil press machine is the use of high-tech technology, the function is very complete. Not only can squeeze rapeseed oil, a lot of things can be squeezed. Rapeseed oil press machine  and other oil press on the work efficiency is the most high. Launched a new generation of Rapeseed oil press machine cleanliness higher, the highest degree of clean oil, the overall quality of rapeseed oil compared with the previous equipment was further improved. The equipment process to take in a closed environment, oil clean and safe.

Rapeseed oil press machine works: Rapeseed oil press machine  operation, the processed oil from the hopper into the press chamber. Rotation by the pressing screw to make the blank material inward to push forward, to squeeze. Because the material embryo in the rapeseed oil gnaw also organic equipment is the movement of the state, in the pressure chamber under high pressure conditions, the material embryo and pressing screw, material embryo and squeeze chamber between a great friction, so that So that materials and materials to produce the relative movement. On the other hand, since the root diameter of the screw is gradually increased, the pitch is gradually reduced, so when the screw movement, the thread can make the feed embryo can move forward, but also phase after rolling, while close to the screw thread Of the material layer also with the press axis rotation. So that each billet embryo particles are not the same speed in the same direction of movement, but in the particles between each other. The heat generated by the friction and meet the oil extraction process operation necessary to help the ingredients in the protein denaturation, destruction of the colloid, an increase of shaping, but also reduces the viscosity of some easy to fold out the oil, thus increasing The rapeseed oil press equipment oil yield, so that oil in the oil squeezed out, and from the row of row gap and row gap in the outflow.

Correct installation method: Before installation, the new purchase Rapeseed oil press machine  should be thoroughly cleaned, out of the spindle, unloaded on the squeeze cage, with the emery cloth to squeeze the outer surface of the screw, the inner surface and screw feeder polished smooth. Lubrication of all lubricating parts shall be carried out. The type and grade of lubricating oil shall meet the requirements in the specification. Round row of polished smooth, the installed base must be in accordance with the original position of emissions, can not be dislocation, because the arrangement of circular row position and order of the rapeseed oil press equipment, a great impact on performance. Round row after the machine with a nut compaction, the degree of compression to disk in the oil squeeze can peristalsis is appropriate. Rapeseed oil press after the above treatment, you can use the anchor bolt to be fixed on the foundation. In the installation, the motor pulley and the oil press pulley should be on its moderate position, the correct direction of rotation, belt tension should be adjusted appropriately.