Author: Admin View: Post Time: 2018 / 05 / 28
Most of the high-quality rapeseed oil press machine by Hengtong Machinery Plant uses a rapeseed oil press to produce oil. Therefore, for the pressing of rapeseed oil, we must understand the oil press. The quality of the rapeseed oil press mainly includes the production quality and machine quality of the oil press. The better the production quality, the higher the quality of the squeezed ones. The better the quality of the machine.
Rapeseed cleaning and drying: Rapeseed entering the oil plant will inevitably carry some impurities. If you do not remove the dirt, stems and leaves, etc. that are entrained in the sesame seeds, they will not only affect the quality of the oil and cake, but will also absorb a part of the oil and reduce the oil yield. If sesame seeds contain gravel, metal, hemp rope and other debris, it will also cause mechanical wear and so on, induce production accidents, affect the process effect.
There are many ways to clean up, depending on the condition of the impurities. If the impurities are light, such as grass, stems and leaves, etc., you can use the method of wind selection, using air flow to blow off impurities. If the impurity particles are small, they can be removed to remove impurities. For some impurities of similar size, relative density and rapeseed, if it belongs to dirt blocks, it can be crushed in the mud machine and then removed by screening. If it is a ferrous impurity, electromagnets or permanent magnets can be used for separation.
Heat treatment is one of the most important processes in the extraction of oils and fats. The heat treatment includes the moistening and heating of the green body, which is called a steamed or fried billet in the production, and the steamed and fried billet is called a green billet. The heat press of the green body is called hot pressing and it is called cold pressing without heat treatment. Rapeseed is mainly hot pressed. The effect of the heat treatment has a direct impact on the smooth progress of the entire oil production process, the level of the oil output.
High oil output rate - Compared with the old equipment, the normal oil output rate can be 4 to 8 percentage points higher, and the average new rapeseed oil press machine output can be as much as 6-10 pounds per kilogram of rapeseed.
Energy Saving - Rapeseed output is reduced by 40% as much as the output of rapeseed, and it is calculated at an average of 6 kWh per hour. The daily production can save 30 yuan. Labor saving - 60% of the labor force can be saved by the same amount of production, 1 to 2 people can organize production, and has a wide range of uses - more than one machine can be used to extract tea seeds,peanuts, sunflower,soybean, tung Seeds and more than 30 oil crops. Five presses, one net.Innovative concept Mechatronics: design science, reasonable structure, easy operation, safety and stability, using a fully automated device, only a few minutes from the feeding to the finished product.
The material of rapeseed oil press machine is made of high-carbon steel, which is made of high-carbon steel with high-frequency quenching and heat-resistance. It has high hardness, high strength, and good wear resistance. It can adapt to high temperature and high pressure continuous operation and improve the use of oil press. Lifespan, use time up to several decades.