Oil press machine, Mini oil press machine, Cold oil press machine, Olive oil press machine_Gongyi Zhanjie Hengtong Machinery Factory

Maintenance is the most important for small oil press machine

Author: Admin View: Post Time: 2017 / 08 / 15

 small oil press machine

Maintenance equipment is the most important oil press machine and small oil press machine yield efficiency in the use of some because of the wrong way when an indelible damage to equipment, everyone knew the most important equipment in oil press, small oil press machine covers an area of small, small power consumption, oil cake quality is good, so in order to customers can be used for a long period of time the equipment, we teach people the right way to use.

Start the motor, start the oil mill, will add 6-8% water content in cake, pour into the hopper, polished pressing chamber, feed is too hard, otherwise can block and pressing chamber jammed machine accident, so start under uniform material should be slow, after being squeezed bore polished, normal after the cake, before the embryo into the hopper.

Use and operation should be controlled according to the different oil cake embryo of temperature and moisture content, normal oil in oil press, must want to stir well, not too little or too much interruption of material, so oil mill will bring damage to oil press equipment, feeding too hard, squeeze the abnormal noise inside the chamber or squeezer shaft jammed, should immediately stop, eliminate the obstruction, or assembled again and start grinding press, it is forbidden to forcibly trailer, to squeeze the end, after the oil is pumped, open the valve on the oil filter, stop the pump running, dry slag is formed on the filter cloth, with scraper scrape, can put the oil filter out the pure oil bottom valve.

When the sesame oil machine is ready to stop, it should stop the feed first and then put in a small amount of cake, then the remaining material will be exhausted, and the cake can be stopped out.After stopping, adjust the screw clockwise from 1 to 3 laps, and disconnect the power.