Author: Admin View: Post Time: 2017 / 06 / 09
In fact, thehydraulic oil press machine oil rate, there are many factors determined. The quality of the sesame itself, the customer's operating experience, the sesame treatment before pressing, the need to steamed sesame seeds, cooling sesame seeds, and then pressing.
Of course, the maintenance of hydraulic press is also very important, but also to improve the oil rate of the key, the specific maintenance measures are:
1. When the squeeze is reduced, the cake or oil is not normal, it should be squeezed out of the squeeze screw, check the screw, squeeze, out of the cake ring wear, wear parts to be replaced.
2. After the end of the production season after long-term storage, should be a maintenance, and squeeze the screw, squeeze, a cake ring wash and wash oil, put in a dry place.
3. After the end of each class work, should be removed within the machine residue, clean the surface of the machine dust, grease.
4. After 50 hours of work should check the lubrication, the gear box above the oil cup shall not be lack of oil, squeeze the shaft to adjust the screw bearing should be adjusted from the screw hole in each class filled with butter once,
5. The oil parts should be to prevent dust and other impurities intrusion, the annual need to check the gearbox oil quality once and found deterioration, should replace all the oil.
Usually we all know that the hydraulic press is good, can really know where the hydraulic press is good and there are a few people? Here we are to analyze what is good where it is. The following are the same as the "
I produced the advantages of hydraulic press: a wide range of presses, can be achieved by pressing and cold pressing two kinds of press, oil crops sesame, peanuts, soybeans, tea seeds, rapeseed, walnut, olives, etc. can be a perfect squeeze The Oil quality is good, pure physical press, cold pressing process does not produce temperature, does not destroy the organic components of oil, with less miscellaneous, high cake value, wide range of applications. The oil rate is high, the company developed the variable-gap hydraulic press press cylinder technology compared with similar products, the oil rate is higher. Convenient and efficient, mechanical and electrical integration design, a high degree of automation, from loading to the cake within 8-13 minutes to complete, the appearance of fine, easy to operate, safe and reliable, low failure rate, long service life. R & D of new chemical raw materials press the use of precision rod gap cylinder structure, squeeze the oil more smoothly, to improve the oil rate, the barrel wall smooth, filter cloth utilization greatly improved. The new design of the hydraulic press design of humanized structure, equipped with explosion-proof motor, explosion-proof electrical appliances, more suitable for the safety of the chemical industry. Supporting the power from the original 8.5kw reduced to 3kw, reducing production costs.
