What is the reason for the row break about the coconut oil press machine ?

Coconut oil press machine is divided into round and row of two, many customers believe that the round row of wear and tear, the line of love to break. In fact, this is not aware of the performance of the situation, we will use some of the presses in the process of improper operation of the row of wear and tear caused by the summary of the situation and sorted out to the scientific theory of the analysis of the reasons for the breakdown of those who have.

Here we declare that the following conclusion is not to bias the oil press, but as a coconut oil press machine  manufacturer to a professional point of view to the scientific analysis of the causes and other objective conditions of the existence of the impact. China is currently using coconut oil press machine  South can be divided into the majority of users, because the region is more rapeseed, suitable for the row of the press. On that a customer in Sichuan, for example, he said there are two coconut oil press machine  home, one is the old-fashioned round row is now an improvement of the row, the row is easy to bad and round is not easy to bad. This is his own in the use of the process after the summary of things, it is estimated that the fact is also the majority. But from a professional scientific point of view, this phenomenon is very abnormal, because as long as the domestic oil press manufacturers are recognized as a fact: that is, round row are cast steel, and the row is die steel casting, two from Material is definitely more wear-resistant compared to the row of oil.

 Why is this user come to this conclusion? In fact, the reason is nothing more than a few:The user in the actual operation of the temperature control is not enough careful, the row of machine heating because it is directly heated in the row of appearance, so the heating speed is more efficient and efficient, while the circular row is the opposite, because the heater is directly fixed in the fixed circle , The need to pass through the round row of the temperature into the squeeze squeeze the press, which led to the effect is the heating rate is slow, and the temperature is extremely difficult to grasp the impact of oil. Moreover, because the circular row is only used in high-strength steel, high-temperature high-strength steel is very easy to break, so round the row in terms of heating as row machine.

Users to buy the coconut oil press machine  is not a regular production of products, some small workshops with 45 steel instead of chrome 12 die steel, and even some black heart manufacturers directly using the most common ordinary carbon steel through heat treatment directly when the raw materials. But the standard material in the oil press on the use of the problem is not difficult to find.

Another is the round row coconut oil press machine  As some manufacturers cut corners of the fixed number of fixed or less fixed ring thickness will lead to this situation, when the manufacturers design problems this situation, the distance between the two fixed circle is certainly a long, The two ends of the force is small, the middle of the state in the absence of support is easy to crack.

The last is the problem of raw materials, some careless customers in the need for processing crushing oil because of too much oil and ignore the oil mixed with small stones, iron and other small hard objects directly into the press chamber, the reasons for this round Row and strip are need to pay attention from the raw materials.