Author: Admin View: Post Time: 2017 / 01 / 05
The latest copra oil press machine maintenance and maintenance of specific measures, the new copra oil press machine design link is to determine the key to the quality of oil press accessories, production accessories are based on the design drawings and the marked parameters, the slightest error will affect the copra oil press machine The overall quality, so the design clearance to make out of the parts clearance, so that the assembled copra oil press machine have better performance in the market, every customer wants to buy a better copra oil press machine , to assist their own oil business , High-quality copra oil press machine not only in the oil can be higher than other machines, and wear durable, the service life will be very long, which is the most practical for users, long life allows users to squeeze more edible oil, Make a huge profit, the quality of a high-quality copra oil press machine accessories must pass to make it have better performance, then how to design accessories to make it through the quality of it.
The lubricating oil parts should be to prevent the intrusion of dust and other impurities, the need to check the oil quality of the gearbox once a year and found deterioration, should replace all the oil, before starting the gearbox must be filled with 12 kg oil, Should be removed within the machine residual cake, clean the surface of the machine dust, grease, as well as the machine line above the grease should be cleaned, otherwise the impact of machine operation.
When the crushing output is reduced, the cake or out of oil is not normal, the machine should be disassembled inspection, the specific approach is to squeeze the screw out, check the screw, press, a pie circle, a slag head wear, wear parts in a timely manner Replacement, installation of new parts, but also the running of the machine, the specific use of cake and coarse sand running, so that the effect is good, after every 50 hours of lubrication should be checked, the gearbox above the oil cup shall not be short of oil, Shaft adjustment screw bearing should be adjusted from the screw hole every class filling butter, dry grinding is prohibited, the machine is strictly prohibited water washing, just run a good machine, you can directly crush the crop, but the beginning of the oil may not be too good, you can not Use, wait until the effect is very good in use.
Design part is to determine the quality of the key parts copra oil press machine , production accessories are based on the design drawings and the parameters of the mark, the slightest mistake will affect the overall quality of the oil press, so the design clearance to make out of the accessories Clearance, so that the assembled copra oil press machine has better performance.
