How to choose a suitable Hydraulic oil press machine

A high-quality hydraulic oil press machine  can make customers in the oil processing convenient and fast work, the choice of models can be processed rapeseed, peanut, soybean, oil sunflower and other oil crops or granular oil. At the same time, check the machine parts are missing, and can manually adjust the screw shaft tight state, to check the squeeze chamber internal for foreign matter, with or without card machine (whether the machine is not a machine, phenomenon. Check the vacuum pump, gear box can work properly.

 First of all, prepare the relevant containers and containers, check and adjust the elastic nut, open the motor, the normal operation of the machine 5-10 minutes to view the rotation speed of the screw shaft, the general machinery for 30-33 r / min, pay attention to gearbox idling clutch State, the bearing and the motor is normal operation. When the oil press idling, the motor current should be about 3A, such as the current is too high, should immediately stop checking, adjust and then boot.

hydraulic oil press machine  start pressing to prevent the feed too quickly, otherwise the pressure inside the chamber suddenly increased, squeeze the screw does not rotate, likely to cause squeeze chamber jam, or even squeeze the cage rupture, a major accident. Therefore, the initial press began, should be slowly into the hopper feeding, the machine running normally. Repeatedly so many times, sustained more than 30h, so that the oil press temperature gradually increased, and even take the smoke (which is normal). When the press began to squeeze the lower temperature of the machine, can slowly twist the adjustment screw, increase the thickness of the cake, while increasing the embryo material, such as pressing water, to be pressed billet temperature can be adjusted to 1.5-2mm thick cake.

hydraulic oil press machine , need to use other raw materials after pressing oil, and noise. The machine uses direct filtration, no need to clean oil low noise, the production process does not add any chemical raw materials, in line with green food standards

 hydraulic oil press machine  processing 50 kilograms of raw materials to power 13 kilowatts of motor 1 hour, the machine processing of 50 kilograms of raw materials, with 3 kilowatts of electricity only 5 minutes of electricity consumption, improve efficiency several times, saving more than 90% of electricity